Showing posts with label cycling. Show all posts
Showing posts with label cycling. Show all posts

Saturday, October 26, 2013

2013 Tri Season Recap

Well, this might be a bit overdue, but here's a recap on my season this year. I saw a lot of improvement over the year, specifically with biking and staying relatively injury free. I also PODIUM'D EVERY RACE (humble brag). Yup, every single one, even the pure running races (although they were small). That was not expected....

Kansas 5150: My first ever DNS (did not start) in triathlon... This was the last race with the ol' Cannondale, and due to wet conditions (I camped that night at Clinton Lake during a Tornado Warning), I bagged the race and attended my sister's graduation later that day. What a great brother!

One of the final rides with the Cannonale

Being a good brother... but bummed.

Topeka Tinman (Short Course:  My first race on my new Cervelo P2, and it did not disappoint. I averaged 3.5 mph faster this year than last on the same course. That was a difference of 7 minutes on the bike segment alone! The run was tough, but I held on for my FIRST AGE GROUP WIN!

STOIC

Suffer

First time finishing first! I beat the spectators...

Shawnee Mission Triathlon (Short Course): This was the 3rd year in a row I've done this race. I've taken 2nd both previous times, and was shooting for the win this time! I had a terrible race (run specifically), but was lucky enough to take 3rd place in my AG! And Rach did her first triathlon!!!

Nerding it up

Rach is now a triathlete!

Lawrence Triathlon (Short):  After Shawnee Mission, I was ready for a good race with a hard effort. The course was flat, conditions were perfect, and I hammered on the bike. Big time. I had the second fastest bike split at 22.6mph, and took 4th overall. AND I MISSED 3RD PLACE BY ONE SECOND! OOOOOONE SECOND!!! But happy with the AG win!

Heading out on the bike
Finishing strong

Jackson County Triathlon (Long Course):  After a solid month of training, I was ready for my longest race of the year! A pseudo-olympic distance race. I had a decent swim, awesome bike (23.5mph average for 24 miles...), and an awesome run (6:58/mi for the 5 mile run). I couldn't get the AG win, but was happy with 2nd place.

swim exit

DOGS!

Midwest Meltdown (Long Course):  One week later, I finished my triathlon season in Paola KS on the pancake flat course at Miola Lake. I traveled all week and was feeling a bit fatigued from it. My legs never opened up, and didn't have the best race I was capable of, but still hung on for 2nd in my age group.

aero

nasty


I'm starting to plan for 2014, and will be branching back into the half ironman distance! IMKS, I'm getting my revenge soon!



mark

Tuesday, September 3, 2013

Midwest Meltdown Long Course Race Report 2013

On Sunday August 25, 2013, I raced my last triathlon of the year (wahhh wuhhh) at the Midwest Meltdown in Paola, KS. I did the short course race last year, and enjoyed the flat course and small registration numbers. I up'd the distance and was in for the long course to end my triathlon season.


The week leading up to the race was very light in terms of training following Jackson County the previous weekend. Plus, Rach and I made a quick and fun trip to San Diego for a wedding. The place and wedding were beautiful, I had a few too many beers, and danced like no one was watching into the wee hours. We returned home 36 hours later, and arrived home around 11:30pm the night before the race, and still had to pack my stuff up.

When I woke up race morning, I knew I wasn't about to have my best race of the year. I was wrecked from traveling, the beers, the dancing, no decent meal the day before, and lack of sleep. I immediately decided to just have some fun in my last race of the year, and be content with that.

Pre Race
Rach and I got to the race site around 6:30am, which provided enough time to get set up, go on a short ride, and get a 5 minute warm up swim in before my wave started at 7:30am. The race itself was very small, but there was a lot of "talent" in the long course race. There were 2 men's waves for the long course. Mine was the first to start, with about 25 people in the wave. I saw Pete, my training buddy, in the wave and decided to try and stick with him like I did for Jackson County.

ME with the BEST sherpa ever!
Swim
Our little wave started at 7:30 without any contact. The group began to spread out quickly, but I had to navigate my way around a few people in front of me because I didn't have enough time to get positioned in front before starting.  I quickly saw Pete to my right, and began to try and pull onto the group in front of me to draft. I never really caught the group, but kept them within striking distance much of the first lap, although there were a few guys off the front.

Swim start. Chaos.
The first loop of the 750 meter course was really uneventful. I was able to get into a groove immediately, and focused on bilateral breathing. At the start of the second loop, I could feel myself slowing down, and was immediately passed by Pete and another swimmer. I made up my mind to stay with them and hopefully draft, but they quickly got out of reach. I stayed within 10 yards of them the remainder of the swim, but didn't get any benefit from drafting.

I really began fatiguing the back half of the second loop and could consciously feel my legs sinking, really wishing the swim was wetsuit legal. My feet began to cramp about 100 yards from shore. I tried to focus on a good body position and strong pull till I got to shore, again a few second behind Pete.

This is what the pros call "exiting the water".
Time:  26:27
Distance: 1500 meters
Pace: 1:37/100 yards
Age Group: 2/3
Overall: 22/73

T1
Once on shore, I just ran to my bike, threw on my aero helmet, and took off. I already had my shoes clipped in, and had an excellent transition spot! Always helpful!

Time: 0:40
AG: 1/3 (tie)
OA: 2/73 (tie)

Bike
The bike course consisted of four 5.2 mile loops around Lake Miola.  The course itself has been compared to riding on a running track. It's flat, but has quite a few little turns. There was also a minor wind out of the South that was more annoying than problematic.

Out of transition, I was immediately passed by Pete and a short course racer. I tried to keep up with them, but I just couldn't.  My legs were not feeling like riding hard, and my heart rate was really low, despite just getting done with a hard swim. I started drinking some water, wondering if I was dehydrated (probably from the weekend). After a half lap, Pete and the short course racer were out of sight. I actually couldn't see anyone, either in front of me or behind me.

Getting da party started... Terrible position.
After the first lap, I started taking in some fuel, hoping my legs would start pushing hard. That didn't really help. I kept trying to push, hoping to see the heart rate rise, but it just stayed in low zone 3. At the start of the 3rd lap, I took a gel with caffeine that seemed to bring my legs to life and I started making up some ground.

Better position, but not liking the pointed toe...
By the time I started the 4th and final lap, I was ready to be off the bike.  I was having a ton of pain in my butt, but it wasn't from sitting on the bike saddle. My guess is it was from all the sitting while traveling and I hadn't stretched out. Regardless, I just pushed and hoped to salvage a decent run. I eventually caughtf Pete in front of me (who obviously slowed down for me) right before T2, and we were going to start the run together for the second week in a row.

Ready to be done...
Time:  54:07
Distance: 20.84 miles
Pace: 23.1 mph
AG: 2/3
OA: 16/74

T2
I did a rolling dismount and kept my shoes clipped into my bike. I just hopped off, ran to my transition spot, took off the helmet and put on my shoes. GONE!

Time: 0:28
AG: 1/3
OA: 2/73

Run
This run started out exactly like last week's awesome run: with Pete setting the pace. Unlike last week, I was unable to hold it for more than a half mile. I quickly began to slow down to something I could maintain for 5 miles, and let Pete go. I soon realized the run wasn't going to be fun, as I began heating up and my legs just didn't have much left.

The run was the same loop as the bike course, so it was nice and flat, but had absolutely no shade.  I was hot. I was able to catch a few people in front of me, but I would have caught them if I was jogging. I kept running, and only walked to take in water at each aid station.

As the miles went on, my pace continued to drop. By the middle of mile 4, I was in full-on damage control mode, feeling like I was about to have some serious cramping in my quads and hamstrings. The sun was brutal, the humidity was worse, and the only thing that prevented me from walking the last mile was the final aid station on the course. Volunteers could tell I was struggling with the heat and they drenched me with ice water. My spirits quickly improved, and I was able to finish the race without walking (or dying).

Black was a bad choice...

Time: 38:27
Distance: 5.2 miles
Pace: 7:24/mile
AG: 2/3
OA: 15/73

Upon finishing, I quickly found Rach and went and sat in the water for a few minutes to get my body temperature down to a more realistic level. I found Pete, who beat me for the second week in a row (getting you next year...), had a few (more) beers, and watched the finishers.

Time:  2:00:09
AG: 2/3
OA: 12/73

All in all, I thought the race went about as well as I expected.  I wasn't expecting an amazing race, and I didn't have one. But that's okay. I still had a great time at a really great local race. I was pumped about the AG podium, but I really didn't care too much about that. I would have podium'd by walking the entire run... But I am happy about placing in my Age Group in every race I did this year!

Well, my triathlon season is officially over. I definitely want to keep racing and training, but I feel like I need a mental and physical break. I also started my fall semester the next day (no coincidence), so my time will be put towards that. I'm going to take a few weeks off of anything structured, and will then begin half marathon training for a fall 13.1.

Be back for a season recap! I progressed A LOT!!!

Thanks for reading!

mark

Friday, August 9, 2013

Peaking

My first of two final triathlons of the year is just about a week away. I've had a solid block of training following my age group win at the Lawrence Triathlon in late July. My achilles is almost fully back to normal, about 90% now. I've been able to slowly add in some intensity again on my runs, which has been lacking since the Topeka Tinman. 

High noon track session in Kansas. Bad idea.

The Jackson County Triathlon is the next race (a faux Olympic distance, with a 1500 meter swim, 25 mile bike and 5 mile run), and I'm fully tapering for the race now.  I'm in what Joe Friel calls the "Peak" period.  I follow a pretty simple periodization program from Friel's books, and just finished my final "build" month, which was brutal.  Peak is all about lowering the total training volume in each discipline. Along with the smaller training volume, the intensity of every workout is either at Race Pace, or Recovery pace.  So either fairly hard or crazy easy... By following this plan, I should be in perfect condition to race.

This is the second time this season I have tapered for a specific race. The first time was Kansas 5150  back in May that didn't end up happening. Wah wuh...  

I'm feeling really good about my swim and bike right now.  I've gotten so much faster in each discipline this year, and am feeling really good about my final two races and what I could throw down in terms of pacing.

Prior to some hill repeats at Shawnee Mission Park

The run, however, isn't exactly close to where I wanted it at the beginning of the year.  I had to decrease my run training because of the Achilles issues, but never had to completely stop training.  

I guess I was hoping for more improvement in all three disciplines, although I will take the swim and bike fitness, as both have improved greatly! Consistency pays off! As does a carbon bike with a wheel cover...

Outdoor pool all summer!

The extra free time I have available now that I'm tapering has opened up some time to do some non-triathlon activities, like Royals games or road trips.  We've also been able to get some wedding planning done! 

Rach figuring out how she wants my hair for the wedding

Royals game prior to some lady jumping in the fountains

Oh and eating. Lots of eating...

A week after the Jackson County race, I'm doing the Midwest Meltdown, another faux Olympic distance race on a COMPLETELY flat course in Paola, KS. There have been some jokes going around that if you want to ride the course, just find a running track and ride for 25 miles... I did the short course race last year and totally agree, pancake flat.

I'm hoping my body can hold up for 2 Olympic distance races on back to back weekends.  Regardless, I'm taking a few weeks off before starting Hal Higdon's 12 week training program for the Gobbler Grind Half Marathon in November.

Hope everyone has been enjoying summer! It's winding down....

Geneseo, IL. Drink it in...

thanks for reading
mark

Tuesday, July 9, 2013

DIY Aero Wheel Cover Tutorial

For the bike leg of a triathlon, AERO (aerodynamics) is KING. Aerodynamics affects everything from water bottle placement on your bike to the type of wheels you use when racing. Hell, I purposely have a triathlon jersey that I race in that is one size too small, so I know it's not going to be flapping in the wind, slowing me down.

Since I got my new bike, I've been really considering everything I could do to make my bike even more aero.  I've purchased an aero race helmet (and look like an alien), taped down wires and cables to hide from the wind, and have removed a saddle bag.  I've been scouring forums on Slowtwitch for ideas to make my Cervelo aerodynamic and light (weight is important, too). And I found my next idea: a disc wheel cover.

Disc wheels in general help you ride faster. I don't know how, or care.  All I know is you ride faster with a disc.  Now, carbon disc wheels are crazy expensive... To get around the insane price tag, there are wheel covers that you can place on your existing training wheelset. They are still around $115, but MUCH more affordable.  This still wasn't good enough for me.  I wanted to make my own custom wheel cover.  And after exploring TONS of forum posts on how to best do it, I started my process. And here's how you can, too!

The soon to be "disc"


What you'll need:

  • Rear Wheel (mine was my training wheel with 30mm depth rims)
  • Blue Painter's tape
  • 2 ABS plastic discs precut to specified diameter (more on this)
  • 1.5 inch circle drill bit
  • ABS Cement (usually found near plumbing supplies)
  • Scotch 3M 33+ Super Vinyl Electrical Tape 
  • Rubbing alcohol
  • duct tape
  • utility knife
  • about 2 hours




















To start, you'll need to find someone that has ABS plastic, preferably .04 thickness. The best I could do was .05 thickness at Regal Plastics in Kansas City. I wanted a bit thinner, but they cut the sheets into circles for me, which saved some time. Since my wheels have a 30mm rim on them, I measured to see what the diameter of the circle should be, and thought 23 inches would be fine.


After getting the discs, I was ready to get going. 

First, cut a hole in the EXACT center of each disc using the 1.5 inch circle drill bit and drill.  The plastic cuts incredibly easily, so if you don't have a drill, you may be able to use a utility knife.


After the the circle holes are cut, you will now need to cut a straight line along the radius of the disc. 

Be sure the disc fits onto your wheel before 'dishing'

Once the radius of each is cut, you now lay the disc on you wheel (with the cassette and quick release removed) and tape the disc down on the wheel.  You will notice that there should be a bit of overlap of the plastic.  Tape down the seam with the painter's tape, and cut the extra plastic off using the utility knife. Doing this wheel create a completely flush disc, and now should also resemble a somewhat "dish", ie not completely flat.


This was all I removed from each. Depending on your wheel size, it might be more...

Now you need to bond the seam back together.  Put the cut disc back on your wheel and retape it again with the painter's tape.  I made sure to do multiple layers, as I didn't want the cement coming through.  Once taped, just apply the cement and let it dry for a few hours.


After the cement dries, it should look like this:

Nice and strong seam
You may also be able to see the "dish" aspect to the wheel cover:


Now all you need to do is tape it to your rim! Start with the drive side (side with your chain and derailleurs). Tape down the cover to your spokes using duct tape, as this prevents the disc from rubbing on your cassette once you reinstall it.

Overkill with the tape. 
Next, clean the wheel cover and rim with rubbing alcohol, as this creates a clean surface for the electrical tape. Lastly, apply the electrical tape, being sure to not stretch the tape AT ALL while you apply it.  I unraveled the tape about 8 inches, let the tape relax, applied the tape, unraveled more, let it relax, applied more, etc... until the wheel cover was fixed.  


Eventually, you'll be done with the drive side.


The last step is to do the same to the other side, but you won't be able to duct tape the wheel cover to the spokes.  

And you are done! It probably cost me $40 to make, but I did need to buy all the tapes and rubbing alcohol, which may be more common household items.

All in all, this process isn't too difficult. I don't consider myself a big DIYer (my future father in law will attest to this).  But I was able to get it done in a reasonable amount of time! 

Pure aeroness

Taping is the most important part, and is probably the part that scares me the most, as I don't want my cover coming off at 30mph. So far, I've put almost 100 miles on the disc, including a 45 mile ride this weekend in the rain and had no problems.  I do feel the extra weight on hillier routes, but I still think the  aero benefits outweigh (not literally) the extra weight of the wheel.  I now feel comfortable with the tape job. 

Also, I have noticed ZERO changes in my handling, despite riding in 15-20mph headwinds, crosswinds, and tailwinds.  I think the handling difficulties with a disc wheel is kinda bull, as all your weight is under the rear wheel. The front wheel is probably more important for handling in the wind...

I plan on racing it this weekend at the Shawnee Mission Triathlon, and will let you know how it holds up!

Hope this tutorial helps! And if you have any questions, just leave a comment!

Thanks for reading, #trilife
mark